New AKS Remote Underground Metal Detector Treasure Detector High Precision Treasure Search Detector for Outdoor

Price: 236.42 - 141.85

Specifications:

Product Name: AKS Metal Detector
Detection type: gold, silver, copper and gems
Search system: microcomputer CPU control and reflective conductivity
Search range: 6000m
Detection depth: 100m
Search range: 1000 meters
Working power: 12V, 1600mAh
Working frequency: 5.6-6KHz
Signal frequency: 360-440Hz
Charging time: 10-12 hours
Detection type: gold, silver, copper, gemstone
Charging method: The instrument has a rechargeable battery installed, directly connected to the charger, you can charge, charging time is 10-12 hours.

Main features of the product:

1. The strongest product core, intelligent modular operation
2. Powerful + Convenience + Efficiency + Speed
3. Easy to use and fast to get started, dual antenna, stronger signal, high detection sensitivity
Probing depth
Maximum detection depth: about 20 meters
This instrument can detect at least 3.5 meters for a 5 cm * 5 cm object.
For a 30 cm * 30 cm object, it can detect 5-8 meters, and if the size of the object is buried for a long time, it can reach 20 meters.
If the area of the object is larger, his depth of detection will be deeper.
Boot test
Open the host
When the host and the searcher switch, the work indicator on the searcher will flash; when the copper position is selected on the host, the corresponding copper indicator on the searcher will light, and then select other silver, gold, and gemstone positions on the host. The corresponding indicator on the searcher will illuminate.
If the gear position is selected on the main unit and the corresponding indicator on the searcher is not lit, the host and the searcher may be low on battery and need to be charged. If the above conditions are normal, the instrument is normal and can be used with confidence.

Use of the transmitter

Power is the power switch button (when the instrument is not used, the switch should not be turned on)

Please select the metal you want to detect according to the original metal you want to detect.

note:
(Cannot select two kinds of metals at the same time) Otherwise, the instrument will be damaged, resulting in no warranty.
Host use

Just turn the power switch on. It can be detected by selecting the metal category according to the original of the transmitter.

Method of operation

Hang the main unit vertically at the waist and try to keep it parallel to the legs. If you are operating the search instrument with your right hand, hang it on the right waist. If you are operating with your left hand, hang it on the left side. Note: Remove metal objects such as mobile phones and key chains.

2. The correct use of the tracker searcher:

The searcher tilts up 1-3 degrees; when holding the searcher, the hand should clamp the body, do not shake; when walking, pay attention to the scanning speed, if the speed is slow, the movement is not enough, it will not polarize the instrument. And if the speed is too fast, it will hinder the discovery of the probe;

Because the instrument's handle is free to rotate, the wind will interfere with Deksa. Therefore, the instrument will be subject to certain interference when it is used in windy conditions. The effect of this instrument is closely related to the operator's control skills for scanning.

Choose a comfortable posture and stand on the ground, holding the instrument with your hand, and the elbows should be tightly attached to the sides of the body. Note: You must have this instrument in front of your body, allow the receiving antenna to have enough room to unfold, and let the antenna tilt slightly downwards from the horizontal. This angle is about 2 to 10 degrees. As mentioned above, holding the instrument, scanning very slowly in an arc, while turning yourself. At this time, the probe elbow should always be tightly attached to both sides of the body, and it is enough to turn 40 degrees to 60 degrees. Note: The detector must be rotated slowly and keep the body steady.

3. Standardize your scanning actions. First, let the receiving antenna extend correctly. With the receiving antenna in front of you, spread 90 degrees to your body and not deflect to the left and right.

When the antenna is aimed at the target, the instrument will lock, although you continue to probe across the target. When you feel that this lock is valid, you will remember this direction. Then, move the instrument about 10 meters to the left or right, repeating the process of locking the target just mentioned. Observe the locking direction of this time. The intersection of the two directions is the buried position of the target.

5. If you feel that there is a certain offset in the specific location you just measured, you can lock it from another angle. If the target is within 10 meters, you will slowly and smoothly follow one of the prescribed routes. When you pass the target and are directly above it, the instrument's antenna will swing on both sides. The position measured at this time is very accurate.

Package Included:
1 x receiver
1 x transmitter
6 x antenna
1 x power adapter
1x instruction manual

1 x plastic suitcase