EAGTAC M30LC2 Pro Turbo Head LED Flashlight Module Replaceable XHP35 596 Meter for Hunting Searching Tactical Torch 18650

Price: 129.90

LED

• CREE XHP35 HD E4 Cool White LED

• CREE XHP35 HI E2 Cool White LED

• CREE XHP35 HI Neutral White LED

• 

Output and Runtime

• Regular model – three brightness levels

• • Led lumen:

  • • XHP35 HD E4:
      20005-1320/710/250 or 18

    • XHP35 HI E2:
      18705-1230/660/225 or 15

  • ANSI FL-1 lumen:

  • • XHP35 HD E4:
      16005-1069/582/208 or 15

    • XHP35 HI E2:
      14005-984/535/185 or 12

• Tactical model – two brightness levels

• • Led lumen:

  • • XHP35 HD E4:
      20005-1320/58/Disorienting strobe

    • XHP35 HI E2:
      18705-1230/48/Disorienting strobe

  • ANSI FL-1 lumen:

  • • XHP35 HD E4:
      16005-1069/48/Disorienting strobe

    • XHP35 HI E2:
      14005-984/43/Disorienting strobe

• Runtime: (Regular mode)

• 1-1.3/2.8/10 or 200 hrs (1×18650 3500mAh) 
  0.5-0.8/1.6/6 or 120 hrs (2xCR123A) 
  1.8-2.6/5.7/20 or 400 hrs (2×18650 3500mAh) 6 

• Runtime: (Tactical mode)

• 1-1.3/50 hrs (1×18650 3500mAh) 
  0.5-0.8/30 hrs (2xCR123A) 
  1.8-2.6/100 hrs (2×18650 3500mAh)6 

• Four hidden auxiliary outputs

• • Disorienting strobe/Flash/ Beacon/S.O.S.

Beam Profile

CREE XHP35 HI E2 Cool White LED 

• Center lux: 89,100 lux

• Beam distance: 650 yards / 596 meters

Operations

• Tactical forward clicky switch

• Basic operation

• • Turn on the light by pressing the tailcap button until it clicks.

  • Twist the head to select between three output levels.

  • Pre-selected output level before turning on the light.

  • Cycle through auxiliary modes: tight the head (1st level), and loose the head (3rd level) and then tight the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loose the head to quit.

• 

• Advanced operation

• • Programing the third level output level: Switch to third level and turn on and off for 20 times.

  • Switching between regular mode and tactical mode: Switch to 2nd output level and turn the flashlight on and off for 20 times.

  • Tail strobe feature (off by default): With this enabled, you can access strobe output at the tailcap switch button . To toogle this function, switch to 1st level and turn the flashlight on and off 20 times. With the tailcap strobe setting enabled, a double press of the switch button will activate the strobe output.

Controls

Other features

• LED direct soldering on copper for maximum heatsink ability

• User replaceable glass lens

• Battery reverse polarity protection

• Ultra low internal resistance phosphor bronze springs (silver coated)

• Spring loaded positive and negative terminal

• One piece head design for maximum heat transfer

• Tailcap battery stabilizer design to prevent battery movement inside the battery tube

Battery Type

• 1×18650 or 2×18650 (optional)2

• Compatible battery (diameter/length)

• • 18650: (18-18.8mm/65-68.8mm)

• Protection PCB trip current: 10A or higher

• Do not use CR123A as it may overheat at MAX output

• Read precaution with li-ion batteries.

Operating voltage

• 2.7V – 8.4V

What's included

• M30LC2 Pro flashlight

• • Crenulated stainless steel bezel

  • Add-on diffuser filter with flip-cover feature

  • Cigar grip cover ring

  • Tail-stand rubber boot

• Spare o-rings

• User Manual

• Mil-Spec Para-cord Lanyard w/ quick attachment clip

• Removeable darken pocket clip made of spring steel w/ harden treatment