Original Jetbeam SSR50 LED Flashlight CREE XHP70.2 P2 3650LM Rechargeable Flashlight with USB Charging for Policing,Searching

Specification:

Product name:JETBeam SSR50 CREE XPH70.2 3650LM Brightness LED Flashlight
Brand:JETBeam
Emitter Type:SSR50
Material:Aerospace grade aluminium alloy
Mode:High,Mid,Low,Eco,SOS,Strobes,Trubo
Lumens:1000LM,400LM,150LM,30LM,400LM,3650LM,3650LM
Runtime:5H,13.2H,35.75H,113H, / , / ,1.75H
Battery Configurations:1x Special battery for this flashlight (Included)
Switch Type:Clicky
Switch Location:Tail and Side of the flashlight
Peaks Beam Intensitys:58400cd
Impact Resistant:1m
Max Output:3650LM
Ranges:483m
Waterproof:IPX-8
Color:Black
Weight:428g without battery
Size:64mmx37.5mmx273mm(Head diameterxTail diameterxLength)

Features:

-USB type C fast charging flashlight.
-Specially designed for patrol,policing,searching and self-defence.
-With CREE XHP70.2 P2 1C LED,high-efficient digital circuit combined with specially-designed OP reflector,SSR50 achieves max output up to 3650 lumens,intensitys 58400cd and beam distance 483m.
-High-efficiency digital constant current circuit.
-Max runtime of 113hrs with high-efficiency digital constant.
-Dual protection for LED and battery with IC digital.
-Stainless steelbezel protects key parts and comes in handy for emergency.
-Built-in intelligent temperature control system automatically balance the brightness and temperature to maximize lifespan of cirtuit and LED chip,and also avoid uncomfort casued by overheating.
-Powerful powered bank function for phone and similar devices.
Convenient dual side switches:
-Easy switching between tow modes
In illumination mode,pressing auxiliary switch (front one) to access flash mode.
In flash mode,proessing masters switch (rear one) to access illumination mode.
-Quick access to different outputs
In illumination mode,short press masters switch for easy access to different outputs.
In flash mode,short press auxiliary switch fo Strobes and SOS.
-Lock-out funtion
Simultaneously press and hold two switches for over 3 seconds till the light blink twice at low output to lock or unlock the light.

Tail switch:

-Click the sounnd switch,the powered level indicator will be turned on.
-Connect the device with the USB port to charge.
-It will stop automatically when the device is full of powered.
-The indicator will be off when the device gtes fully charged or removed halfway.
4 LEDs indicating powered level at any times:
-The more LEDs keep on,the higher the battery level remains.
-Clip the round switch on the tail,the remaining powered level will be indacated in below way:4 LEDs on means powered≥80%,1 LED on means powered≥20%,1 LED flashing means powered<20%.
Low voltage warning system:
-When the voltage drops below the preset level,the ouput will automatically step down till Eco.
-If this happens in Eco,the light will blink three times every 5 mintues to remind the user or charging or battery replacement.
-To ensure normal use,the light will not be off until the battery over-discharging protect activates.

Package included:

1 x JETBeam SSR50 LED Flashlight
1 x O-ring
1 x Holster
1 x 7.2V/5000mAh Li-ion battery
1 x USB charging
1 x USB adaptor